Wholesale Panel Frame 600×1200 2×4 For Edgelit Panel Eu Standard

The future growth power of our company will be the unique led strip for backlight, motorhome roof light, RGBW led strip created by our company, and at the same time, we will enhance our ability to penetrate the traditional international market. The high-quality technical talent team is an important guarantee for our company to continue to maintain technological leadership and core competitiveness. We sincerely welcome customers to visit and guide, discuss cooperation matters, and create a better future with our quality service! The development of the company is an opportunity given to us by history. The company's achievements today are due to our grasp of the opportunity; it is the strong support of all the company's partners and friends from all walks of life; it is the result of the hard work of every employee of the company.

LED Flat Light Panels

According to the lighting mode, LED flat panels are divided into edge lit LED panels and back lit LED panels. The light source of edge lit LED panel is distributed on the side of the panel lamp and illuminated through the light guide plate.The light source of back lit LED panel lamp is evenly distributed on the back plate and directly illuminated through the diffusion plate.

Under the same wattage of traditional lighting source, LED flat panel has the characteristics of energy saving, good uniformity of illumination, higher color rendering index, soft and comfortable light, etc. It has been widely used in office, school, hospital, shopping mall, home and other places to replace the traditional grid lamp in the LED era.

Features

1. Ultra-thin design, simple and fashionable appearance. Suitable for new construction and remodel installations.

2. CRI > 80, the light similar with the sunshine.

3. Frosted PMMA diffuser (UGR<19 / <16) with uniform light distribution for max light output.

4. 0/1-10V, Triac / ELV dimming down to 10%; RGB & CCT color control, by remote controller or WIFI, Dali, DMX, PWM, other signal.

5. Strong canopy and frame for easy and fast installation.

6. Suitable for day and damp locations.

7. Energy saving, high brightness, no mercury, no infrared, no ultraviolet, no electromagnetic interference, no thermal effect, no radiation, no stroboscopic phenomenon.

8. Comply with UL, DLC, SAA, TUV-GS, CE requirements.

9. Warranty: 5 years.

10. ODM and OEM are available.

Edge-lit LED Panel is the common to use and the standard color temperatures of 3000K, 4000K, 5000K, and 6000K are available.

Specification

Installation & Application

1. LED Flat Panel Surface Mount

2. Recessed LED Panel Ceiling Light

3. Suspended LED Panel Light

The flat panel light is ideal replacement for the traditional down lights. It has wide range of applications such as:

1. Hotel, residential, restaurant, museum, art gallery

2. Office, meeting room, household lighting, kitchen, school, hospital

3. Commercial lighting, shopping mall, jewelry counter, cosmetic counter, show window, lobby, aisle, etc.

Packaging & Shipping

How to select LED flat panel or identify the quality:

1. The overall "power factor of lighting": If the power factor is low, it means that the driving power supply and circuit design are not good, which will greatly reduce the service life of lighting! If the power factor is low, no matter how good the lamp bead is used, the service life of lighting will not be long. The power factor can be detected by "power factor meter". Generally, the power factor of LED flat panel lamp for export is required to be above 0.85. If the power factor is lower than 0.5, it should be said that unqualified products or garbage products not only have short service life, but also the actual power consumption is about twice as high as the nominal value, that is to say, compared with ordinary energy-saving lamps, there is no power saving at all! Therefore, this is why LED flat panel lamps need to be equipped with high-quality and high-efficiency driving power supply! There is no "power factor meter" to detect the LED lighting function Rate factor consumers, there is another way is to use the "ammeter" to detect two similar products with the same nominal power, the greater the current and the greater the current harmonic, indicating that the actual power consumption is greater, the less energy-saving! At the same time, the current instability is not conducive to the life of the lamp bead and the life of the overall lighting!

2. Lighting cooling conditions -- materials and structure: LED lighting cooling is also very important. If the lighting with the same power factor and the same quality of lamp beads are not well cooled, the lamp beads will work at high temperature, the light decay will be great, and the lamp life will be reduced. The main heat dissipation materials used are copper, aluminum and PC. The heat conduction of copper is better than that of aluminum, and the heat conduction of aluminum is better than that of PC. now, the most commonly used heat sink material is aluminum, the best one is insert aluminum, the second is car aluminum (aluminum profile, extrusion aluminum), the worst one is cast aluminum, and insert aluminum has the best heat dissipation effect!

3. The lamp quality: Lamp quality depends on chip quality and packaging technology.

The quality of the chip determines the brightness and decay of the lamp bead. A good lamp has not only a high luminous flux, but also a low luminous decay.

4. The driving power used in lighting, the service life of the power supply is much shorter than that of other parts of the lighting. The service life of the power supply affects the overall service life of the lighting. The theoretical service life of the lamp bead is 50,000-100,000 hours, while the service life of the power supply is 20,000-30,000 hours. The design and material selection of the power supply will determine the service life of the power supply. The appearance of aluminum alloy power drive is better than that of engineering plastics. First, it has good heat dissipation. Second, it can effectively protect the parts from being crushed and loose during transportation and use, and reduce the failure rate of power drive.

5. The light efficiency: The same power, the higher the light efficiency, the higher the brightness. If the same lighting brightness, the smaller the power consumption, the more energy saving.

6. The power efficiency. The higher the power efficiency is, the better it is. It shows that the smaller the power consumption is, the greater the output power is.

We will make every effort to be outstanding and perfect, and accelerate our steps for standing in the rank of international top-grade and high-tech enterprises for Wholesale Panel Frame 600X1200 2X4 for Edgelit Panel EU Standard. We seek development in the market economy, and innovation in business development. In the process of dealing with customers, we have always tried our best to be responsible, transparent and meticulous in our work, and strive to establish a good image of integrity.